Onderwerp bekijken
 Basic characteristics of Q235 steel
|
|
| zhangxiaosan |
Geplaatst op 25-08-2021 08:20
|
 Guru  Berichten: 9433 Datum van aanmelding: 20.09.16 |
In GB / T 700-2006, carbon structural steel Q235 is divided into four grades A, B, C and d according to metallurgical quality, and the chemical composition of each grade is Q235: Grade A, B, C and D (GB / T 700-2006)304 elevator stainless steel decorative sheet Q235 class A contains C ≤ 0.22%, Mn ≤ 1.4%, Si ≤ 0.35%, s ≤ 0.050 and P ≤ 0.045 Grade Q235B contains C ≤ 0.20%, Mn ≤ 1.4%, Si ≤ 0.35%, s ≤ 0.045 and P ≤ 0.045 (with the consent of the demander, the carbon content can not be greater than 0.22%) Q235C grade, C ≤ 0.17%, Mn ≤ 1.4%, Si ≤ 0.35%, s ≤ 0.040, P ≤ 0.040 Grade q235d, containing C ≤ 0.17%, Mn ≤ 1.4%, Si ≤ 0.35%, s ≤ 0.035 and P ≤ 0.035 There are many examples of manufacturing cold working dies by using low-carbon martensite rigid quenching process in China.301 Heat Resisting Stainless Steel Coil Using double glow plasma alloying technology, Mo CR co infiltration is carried out on the steel surface, followed by supersaturated carburizing, quenching and tempering. The thickness of Mo CR body layer is more than 100 microns, the surface Mo content can reach 20%, the Cr content can reach 10%, the carbon content of supersaturated Carburized surface can exceed 2.0%, the surface composition is close to molybdenum high-speed steel, and the surface hardness after quenching and tempering can reach 1300hv, More than general metallurgical high speed steel. The wear test shows that the friction coefficient increases with the increase of contact stress, and the average relative wear resistance is 2.2 times that of GCr15 carburized quenched steel.OEM polished standard stainless steel poles for tent |
|
|
|
| Spring naar forum: |
